• 100% Black-owned, Level 1 B-BBEE

Wear Protection & Linings

Wear Protection & Linings

Service Overview

Locally produced wear parts that extend equipment life and reduce downtime. Cut to size. Made to last. Ready in a week.

Widely used in chrome mining, our classifier nozzles are known for efficiency and durability. With a 2.5 mm orifice, they are made from ceramic, porcelain or polyurethane, and last up to two months in service. They are locally produced, have a superior finish and are not brittle, so they stay reliable in tough conditions. Lead time is one week, and they are already in use at several South African mines. Our high-performance ceramic tiles line mining equipment for wear protection, available in various sizes with a cut-to-size option for a custom fit.

What we supply

  • Classifier nozzles with a 2.5 mm orifice
  • Up to 2 months service life on nozzles
  • 1 week lead time on nozzles
  • Ceramic tiles cut to size on request
From flow to force, movement to protection, we deliver mining solutions that keep your operation running strong.
Wear Protection & Linings

Locally produced classifier nozzles with a superior finish that is not brittle.

Wear Protection & Linings

Ceramic tiles for impact resistance and longevity in high-wear applications.

Matching the lining to the wear mechanism

Plant wear comes in two main forms. Sliding abrasion, where particles move across a surface under load, dominates in chutes, launders, cyclones and pipe bends. Impact, where lumps fall onto a surface, dominates at transfer points and hopper floors. Alumina ceramic is very hard and resists sliding abrasion well, but it is brittle under heavy impact. Selecting a lining therefore starts with identifying which mechanism is doing the damage.

Products in this service

ProductTypical useKey specification (Songatech data)Product page
Alumina tiles 92% and 95%Chutes, launders, cyclones, sliding abrasion6-50 mm thick, 100 × 100 mm and 150 × 150 mm standardCeramic tiles
Hexagonal and mosaic tilesPipes and curved surfacesOn rubber or steel backingCeramic tiles
Weldable ceramic platesHoppers and bins with bulk materialCeramic on steel plate with weld studsCeramic tiles
ZTA tilesTransfer points and impact zonesZirconia toughened aluminaCeramic tiles
Classifier nozzlesClassification and desliming2.5 mm standard orifice, 2-4 mm on requestClassifier nozzles

Selecting tile grade and thickness

Grade

92% alumina is a common general-purpose grade. 95% alumina gives higher hardness and density for more severe sliding wear. Where impact and abrasion occur together, ZTA or rubber-backed tiles reduce cracking. The alumina tile selection guide explains the grade, thickness and fixing choice in detail.

Thickness

Thickness is set by expected wear rate and the desired interval between relines. Thin tiles of around 6-12 mm typically suit fine slurry in pipes and small cyclones, 10-25 mm suits cyclones, launders and chute floors with sliding wear, and 20-50 mm rubber-backed or ZTA panels suit transfer points with impact. Doubling thickness roughly doubles the wear allowance but also adds mass, which matters on hinged or suspended parts.

Fixing method

  • Epoxy bonded: for flat or gently curved steel surfaces with sliding wear and moderate temperature.
  • Rubber backed: the rubber absorbs impact and the panel can be bolted in place, which suits chutes with some drop.
  • Weld-on plates: studs give a mechanical fix for heavy bulk handling where adhesive alone may let tiles detach.

Cut-to-size linings

Complex parts such as cyclone cones, launder bends and chute transitions leave gaps if lined with standard square tiles. Gaps let slurry reach the steel behind the lining and cause wash-out. Cutting tiles to a drawing reduces the number of joints and keeps joints out of the main flow path. The cut-to-size ceramic lining guide covers measuring, templates and installation.

Classifier nozzles

A classifier nozzle controls discharge from a classifier or distributor. As the orifice wears, flow rises and the classification changes, so nozzle wear has a direct effect on separation. Ceramic nozzles hold their bore longest on abrasive chrome duties, porcelain suits medium duty, and polyurethane suits mixed duties where impact and handling are a concern. Songatech nozzles have a 2.5 mm standard orifice, last up to two months in abrasive chrome service and have a one-week lead time.

How the work is scoped and quoted

  • Part to be lined, with a drawing, measurements or photos.
  • Material handled, lump size, drop height and whether it is wet or dry.
  • Operating temperature and any chemical exposure.
  • Current lining and its service life.
  • For nozzles: orifice size, material and quantity per change-out.

Frequently Asked Questions

Built to last. Delivered on time. Local stock and fast lead times keep your plant running.

  • Can ceramic tiles handle impact?
    Plain alumina is hard but brittle, so it can crack under heavy impact. For impact zones, ZTA tiles or rubber-backed ceramic panels are used, because they combine abrasion resistance with better impact tolerance.
  • What thickness of ceramic tile do I need?
    It depends on the wear rate and the reline interval you want. Typically 6-12 mm suits fine slurry in pipes and small cyclones, 10-25 mm suits cyclones, launders and chute floors, and 20-50 mm impact panels suit transfer points.
  • How long do Songatech classifier nozzles last?
    Up to two months in abrasive chrome environments. Life depends on the material chosen, the slurry and the operating pressure.
  • Can you cut ceramic tiles to fit my equipment?
    Yes. Tiles can be cut to drawing for complex layouts, which reduces joints and gives a tighter fit on curved or irregular parts.
  • How do I request a quotation?
    Call 010 555 0828, email admin@songatech.co.za or use the quote form on our contact page. Send us your drawings or dimensions and we will match the product to your equipment.
  • Do you keep stock locally?
    Yes. Local stock at our Alrode head office and fast lead times mean consistent service and immediate distribution to mining operations.
  • Do you offer on-site support?
    Joint ventures and a strong regional presence let us offer tailored on-site support across South Africa's key mining regions and neighbouring countries.